Good Quality Power Tool Accessories, YT-160A Red Double Head She

Our products have good quality assurance and good sales all over the world. If you have any questions about our products, please feel free to contact us.
Due to manual measurements, please allow a 0.1-0.5 inch difference. (1 inch = 2.54 cm)
Specification:
Fit For Electric Drill
Color: Red
Model: YT-160A
Material : Metal, Plastic
Color : Black, Silver Tone
Cutting Diameter : 7.4mm / 0.3"
Handle Diameter : 33mm
Overall Size : 18 x 5.0 x 7.6cm / 7" x 2" x 3" (L*W*H)
Suitable for car repair and maintenance and metal sheet productions.
Allow Cutting Thickness:
Ordinary iron plate: 1.8mm
Stainless steel plate: 1.2mm
Copper, aluminum plate: 2mm
Plastic plywood car: 2mm
Instructions:
1.When using the thin plate hole opener, first insert the drill front end and the cutter into the round hole of the hole opener, connect the cutter to the electric drill and lock it tightly, then put the three branches on the shelf and the stud screws tightly. In order to prevent the hole opener from sliding; insert the left and right positioning pins upward into the small square hole of the shelf, and finally adjust and tighten the tight screw according to the size of the arc to be cut, and fix the ruler Prison to ensure the accuracy of cutting round holes.
2.When cutting a standard arc, a thin-plate hole opener should be used to ensure that the circular cut surface is smooth and beautiful. It should also be drilled with a 3 mm positioning eye first, and then drill a 12 mm hole to extend the cutter head into the hole. Cut the inner and outer circles.
Operational Requirements:
1.It is especially important to cut the aluminum plate at the blade edge.
2.After the electric drill is first opened, the electric drill is turned